RAD Data comm Vmux-210 Specifications Page 94

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 93
Chapter 4 Configuration Installation and Operation Manual
4-26 Configuring for Operation Vmux-210 Ver. 1.1
Table 4-26. Voice Parameters (Cont.)
Parameter Description Possible Values/
Reference
Caller ID Tx Delay
(msec)
Time delay before transmitting caller ID for
this bundle
Note: This parameter is available only when
Coder/Rate is defined as G.729A/8.
0..3000
Default: 400
Volume (To Line) The volume gain transmitted to the DSP
(from network towards the PBX).
Note: This parameter is available only for
E1/T1 device
-6 dB..6 dB in steps
of 1 dB
Default: 0 dB
Volume (From Line)
The volume gain transmitted from the DSP
(from the PBX towards the network)
Note: This parameter is available only for
E1/T1 device
-6 dB..6 dB in steps
of 1 dB and 12 dB
Default: 0 dB
VAD Opens the VAD menu See
Figure 4-28
CNG Mode Determines Comfort Noise Generation for
this bundle
Off
On
Default: On
Echo Canceller Enables echo cancellation for the bundle Enable
Disable
Default: Enable
Advanced Voice
parameters
Opens the Advanced Voice parameters menu
See
Figure 4-29
Configuring a Bundle’s Fax/Modem Parameters
To configure a bundle’s fax/modem parameters:
From the Main Menu, select Configuration > Bundles > Configure >
Edit Bundle > Voice Parameters > Fax/Modem.
Fax/Modem
1. Modem> (Relay)
2. VBD Rate > (G711 64k 5 msec)
3. Fax (Enable)
4. Fax Rate (kbps)> (14.4)
5. Max VBD Modem Calls
6. Max Relay Modem Calls
Figure 4-27. Fax/Modem Menu
Page view 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 191 192

Comments to this Manuals

No comments