RAD Data comm Vmux-210 Specifications Page 110

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 109
Chapter 4 Configuration Installation and Operation Manual
4-42 Configuring for Operation Vmux-210 Ver. 1.1
User Port Configuration
1. IP... (172.17.172.191)
2. Mask... (255.255.255.0)
3. ARP Table Aging Time (minutes) [1 – 99] … (5)
4. RIP>
5. Firewall>
6. DHCP Relay (Enable)
7. Relay to DHCP Server IP... (0.0.0.0)
Figure 4-44. User Port Menu
Table 4-42. User Port Parameters
Parameter Description Possible Values/
Reference
IP IP Address of the Router user port
Note: Modifying this parameter may
disconnect NMS.
Default: 0.0.0.0
Mask Subnet mask of the Router user port Default: 0.0.0.0
ARP Table Aging
Time (minutes)
The aging time for the ARP table of the
Router user port
1..99
Default: 5
RIP Opens the RIP menu See
Figure 4-45
Firewall Opens the Firewall menu See
Figure 4-46
DHCP Relay Whether or not the Router user port acts as
a DHCP proxy
Note: This parameter is not available when
DHCP server is enabled on the Router.
Enable
Disable
Default: Disable
Relay to DHCP
Server IP
IP address of the DHCP server to which
requests are relayed
Note: This parameter is available only when
DHCP Relay is enabled.
Default: 0.0.0.0
Configuring RIP Parameters
To configure RIP parameters:
From the Main Menu, select one of the following:
Configuration > Applications > Router > Interfaces >
Uplink Port Configuration > RIP
Configuration > Applications > Router > Interfaces >
Network Port Configuration > RIP
Configuration > Applications > Router > Interfaces >
User Port Configuration > RIP.
Page view 109
1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 191 192

Comments to this Manuals

No comments