RAD Data comm Vmux-210 Specifications Page 109

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 108
Installation and Operation Manual Chapter 4 Configuration
Vmux-210 Ver. 1.1 Configuring for Operation 4-41
Table 4-41. Network Port Parameters
Parameter Description Possible Values/
Reference
IP IP Address of the Router network port
Note: Modifying this parameter may
disconnect NMS.
Default: 0.0.0.0
Mask Subnet mask of the Router network port Default: 0.0.0.0
DHCP Client Enables the Router network port to act as a
DHCP Client
Note: This parameter is available only when
the Main Link is defined as Ethernet.
Enable
Disable
Default: Disable
ARP Table Aging
Time (minutes)
The aging time for the ARP table of the
Router network port
1..99
Default: 5
RIP Opens the RIP menu See
Figure 4-45
Firewall Opens the Firewall menu See
Figure 4-46
DHCP Relay Whether or not the Router network port
acts as a DHCP proxy
Note: This parameter is not available when
DHCP server is enabled on the Router.
Enable
Disable
Default: Disable
Relay to DHCP
Server IP
IP address of the DHCP server to which
requests are relayed
Note: This parameter is available only when
DHCP Relay is enabled.
Default: 0.0.0.0
Configuring the Router User Port
The User Port Configuration menu is not available when the Main Link is not
defined as Ethernet and the Ethernet Net/User Connection is defined as Layer 3
Routing.
To configure the Router user port:
From the Main Menu, select Configuration > Applications > Router >
Interfaces > User Port Configuration.
Note
Page view 108
1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 191 192

Comments to this Manuals

No comments