Chapter 4 Configuration Installation and Operation Manual
4-44 Configuring for Operation Vmux-210 Ver. 1.1
Firewall
1. Firewall Status (Enable)
2. Firewall Direction (Outbound)
3. Active FTP (No)
4. Forged IP Protection (No)
5. Rules>
Figure 4-46. Firewall Menu
Table 4-44. Firewall Parameters
Parameter Description Possible Values/
Reference
Firewall Status Enables the firewall for this router port Enable
Disable
Default: Disable
Firewall Direction Direction of firewall protection for this
router port
Note: This parameter is available only when
the firewall is enabled.
Inbound
Outbound
Default: Outbound
Active FTP Allows FTP sessions through the firewall for
this router port
Note: This parameter is available only when
the firewall is enabled.
Yes
No
Default: No
Forged IP
Protection
Detects and protect against forged IP frames
for this router port
Note: This parameter is available only when
the firewall is enabled.
Yes
No
Default: No
Rules Opens the Rules menu
Note: The Rules menu is available only when
the firewall is enabled.
See
Figure 4-47
Defining Firewall Rules for Router Ports
This section discusses adding and removing firewall rules from a Router port, and
displaying all rules applied to the port. For information on defining or modifying
firewall rules.
To display/configure firewall rules for Router ports:
• From the Main Menu, select one of the following:
Configuration > Applications > Router > Interfaces >
Uplink Port Configuration> Firewall > Rules
Configuration > Applications > Router > Interfaces >
Network Port Configuration> Firewall > Rules
Configuration > Applications > Router > Interfaces >
User Port Configuration> Firewall > Rules.
Comments to this Manuals