RAD Data comm Vmux-210 Specifications Page 108

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 107
Chapter 4 Configuration Installation and Operation Manual
4-40 Configuring for Operation Vmux-210 Ver. 1.1
Table 4-40. Uplink Port Parameters
Parameter Description Possible Values/
Reference
IP IP Address of the Router uplink port
Note: Modifying this parameter may
disconnect NMS.
Default: 0.0.0.0
Mask Subnet mask of the Router uplink port Default: 0.0.0.0
ARP Table Aging
Time (minutes)
The aging time for the ARP table of the
Router uplink port
1..99
Default: 5
RIP Opens the RIP menu See
Figure 4-45
Firewall Opens the Firewall menu See
Figure 4-45
DHCP Relay Whether or not the Router uplink port acts
as a DHCP proxy
Note: This parameter is not available when
DHCP server is enabled on the Router.
Enable
Disable
Default: Disable
Relay to DHCP
Server IP
IP address of the DHCP server to which
requests are relayed
Note: This parameter is available only when
DHCP Relay is enabled.
Default: 0.0.0.0
Configuring the Router Network Port
To configure the Router network port:
From the Main Menu, select Configuration > Applications > Router >
Interfaces > Network Port Configuration.
Network Port Configuration
1. IP... (172.17.172.191)
2. Mask... (255.255.255.0)
3. DHCP Client (Disable)
4. ARP Table Aging Time (minutes) [1 – 99] … (5)
5. RIP>
6. Firewall>
7. DHCP Relay (Enable)
8. Relay to DHCP Server IP... (0.0.0.0)
Figure 4-43. Network Port Menu
Page view 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 191 192

Comments to this Manuals

No comments