RAD Data comm Optimux-106 Specifications download pdf (Page 43)

Optimux-106 Ver. 6.1 Indicators 3-1

Chapter 3

Operation

3.1 Turning On Optimux-106

³ To turn on an Optimux-106 unit with a single power supply:

1. Connect the power cable to the power connector on the rear panel of the

Optimux-106.

2. Connect the power cable to the electric outlet.

The PWR indicator lights in green.

³ To turn on an Optimux-106 unit with two power supply units:

1. Connect each power cable to a power connector on the Optimux-106 rear

panel.

2. Connect each power cable to the electricity outlet.

The PWR indicator lights in green.

During normal operation:

• The PWR indicator lights in green

• The indicator corresponding to the uplink in use, A or B, lights

• All SYNC LOSS front-panel indicators are turned off.

3.2 Indicators

Front Panel Indicators

Figure

3-1

shows the Optimux-106 front panel.

Table

3-1

lists the functions of the

front panel indicators.

Figure

3-1 Optimux-106 Front Panel – Plastic Enclosure

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 109 110

No comments

RAD Data comm Optimux-106 Specifications Page 43