RAD Data comm MPW-1 Specifications Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
Chapter 1 Introduction Installation and Operation Manual
1-18 Functional Description MPW-1 MP-4100 Ver. 2.0
auto-negotiation can be disabled, and the rate and operating mode be directly
specified.
The Ethernet ports can be ordered with one of the following types of interfaces:
10/100BASE-TX interfaces terminated in RJ-45 connectors. In addition to
auto-negotiation, MDI/MDIX polarity and cross-over detection and automatic
cross-over correction are also supported. Therefore, these ports can always
be connected through a “straight” (point-to-point) cable to any other type of
10/100BASE-T Ethernet port (hub or station).
Sockets for SFP Fast Ethernet transceivers. RAD offers several types of SFPs
with optical interfaces, for meeting a wide range of operational requirements.
Table
1-1
lists the RAD SFPs with optical interfaces recommended for use
with MPW-1 (for a complete and current list of SFPs available from RAD, refer
to the
RAD SFP Transceivers
data sheet). Most SFPs include DDM (Digital
Diagnostic Monitor) and internal calibration.
Table
1-1. Optical Interface Characteristics of RAD SFPs
SFP Type
and Operating
Wavelength
Fiber Type Transmitter Type
Input Power
(dBm)
Output Power
(dBm)
Typical Max.
Range
(km/miles)
Connector
Type and
Number of
Fibers per Port
min max min max
SFP-1
Tx/Rx: 1310nm
62.5/125 μm,
multi-mode
LED
-30 -14 -20 -14
2/1.2 LC;
two fibers
SFP-1D
Tx/Rx: 1310nm
62.5/125 μm,
multi-mode
LED
-30 -14 -20 -14
2/1.2 LC;
two fibers
SFP-2
Tx/Rx: 1310nm
9/125 μm,
single mode
Laser
-28 -8 -15 -8
15/9.3 LC;
two fibers
SFP-2D
Tx/Rx: 1310nm
9/125 μm,
single mode
Laser
-28 -8 -15 -8
15/9.3 LC;
two fibers
SFP-3
Tx/Rx: 1310nm
9/125 μm,
single mode
Laser
-34 -10 -5 0
40/24.8 LC;
single fiber
SFP-3D
Tx/Rx: 1310nm
9/125 μm,
single mode
Laser
-34 -10 -5 0
40/24.8 LC;
single fiber
SFP-10a
Tx: 1310nm
Rx: 1550nm
9/125 μm,
single mode
Laser (WDM)
-28 -8 -14 -8
20/12.4 LC;
single fiber
SFP-10b
Tx: 1550nm
Rx: 1310nm
9/125 μm,
single mode
Laser (WDM)
-28 -8 -14 -8
20/12.4 LC;
single fiber
SFP-18A
Tx: 1310nm
Rx: 1550nm
9/125 μm,
single mode
Laser (WDM)
-28 -8 -5 0
40/24.8 LC;
single fiber
SFP-18B
Tx: 1550nm
Rx: 1310nm
9/125 μm,
single mode
Laser (WDM)
-28 -8 -5 0
40/24.8 LC;
single fiber
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 107 108

Comments to this Manuals

No comments