RAD Data comm Optimux-34 Specifications download pdf (Page 22)

Chapter 2 Installation and Setup Optimux-XLT1 Installation and Operation Manual

2-2 Installation and Setup

2.3 Package Contents

A preliminary inspection of the equipment contained in the shipping box should

be made before unpacking. Evidence of damage should be noted and reported

immediately. The Optimux-XLT1 package includes the following items:

• Optimux-XLT1 unit

• Optimux-XLT1 Installation and Operation Manual

• Power cable – 110 or 220 depending on your order

• Interface adapter cable – High speed modules depending on your order

• If –48 VDC version is ordered, 48V plug is supplied

• If 24 VDC version is ordered, 24V plug is supplied.

2.4 Installation and Setup

This section details the functions and positions of the internal switches and

jumpers used to configure the Optimux-XLT1 unit for your particular application.

A common configuration procedure is provided. Then, the configuration options

and the default settings for each module are detailed.

Identifying Optimux-XLT1 Modules

Figure 2-1 and shows the modular construction of the Optimux-XLT1 unit. Use this

figure to identify the modules supplied.

➤ To remove the unit from its case:

1. Unscrew three captive screws on each side of the unit and eight captive screws

on the top.

2. Remove the Optimux-XLT1 top cover.

3. Check that the optional modules ordered are installed in the unit case. Refer

to Table 2-1 and verify the designation of the modules/cards in capital letters.

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610

www.bestdatasource.com

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 77 78

No comments

RAD Data comm Optimux-34 Specifications Page 22