RAD Data comm Optimux-34 User Manual download pdf (Page 3)

Data Sheet

STANDALONE DEVICES

The standalone devices can be supplied

with one V.35 (2 MB/sec) channel that

replaces channel 16 by user activation.

Management

Management and diagnostics can be

performed via:

• ASCII terminal

• Telnet

• RAD's Web-based management

application

• RADview, RAD's SNMP-based

management application.

Physical

Optimux-25 is a compact, 1U-high unit.

Optimux-34 is available in two versions:

• 1U-high unit with balanced E1

interface, RJ-45 connectors

• 2U-high unit with unbalanced E1

interface, BNC or IEC-169/13

connectors.

The units can be mounted in a 19-inch

rack.

Power

The standalone power supply is a

wide-range AC/DC power supply that can

be connected to either an AC power

source (100 to 240 VAC), or a DC power

source (–48 VDC).

An optional second power supply provides

power redundancy.

CARD MODULES

The OP-34C and OP-25C multiplexers are

cards designed for operation in the

LRS-102 chassis. The LRS-102 chassis can

contain up to 12 cards (192 links). An

Optimux link provides a simple and

low-cost solution for connectivity over

distances of up to 110 km (68 miles).

Link Interfaces

Pluggable SFP units provide the link

interfaces. A wide variety of

optical/electrical interfaces are available

for ordering as single or dual modules (see

Table 2

and

Ordering Options

).

It is strongly recommended to order this

device with original RAD SFPs installed.

This will ensure that prior to shipping, RAD

has performed comprehensive functional

quality tests on the entire assembled unit,

including the SFP devices. RAD cannot

guarantee full compliance to product

specifications for units using non-RAD SFPs.

Management

Setup, control, and diagnostics are

performed by the LRS-102 management

rack (see

LRS-102 Data Sheet

).

Physical

Each card fits in a single slot of the

LRS-102 chassis.

Note

: For OP-34C/OP-25C cards operating in

the Megaplex-4100 enclosure, refer to a

separate OP-34C/OP-25C data sheet included

into the Megaplex-4100 folder.

Power

The power for cards is provided by the

LRS-102 power supply.

Figure 2. Service Extension over Wireless Link

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments